Home  > Products   >  Multimeters   >  AC/DC Clamp-On   >  6800
  6800 - 80,000 Count Digital Multimeter  
  *** THIS PRODUCT IS OBSOLETE ***  
 
 
Click for larger picture

Click on image for larger picture
   
• 80,000 count Dual Display
• Basic DC accuracy is 0.05%
• Pulse output with frequency selection from 0.5Hz to 5KHz with duty cycles from 1% to 99%
• Measures frequency, ms Pulse width and duty cycle
• AC and AC+DC TRUE RMS measurements.
• Hi and Lo limit testing
• dBm measurement using 20 reference Impedances
• Min/Max/AVG
• Peak hold and Relative mode
• RS232 port
• CE and Category II 1000V and Cat III 600V safety standards
• Built in 10 hour timer
• MSRP: $220.00
 
  •    Related Links
    		•
       Request Quotation    Request Demo
       Download Product Data Sheet    Download software
       Multimeter Selection Guide
     
  •    Specification
    		•
    mV DC
    Ranges 80 mV, 800 mV
    Best Resolution 1µV
    Accuracy ±0.05% + 10d
    Input Impedance 1GW
    DC Volts
    Ranges 8V, 80 V, 800V, 1000V
    Best Resolution 100µV
    Accuracy ±(0.05% + 10d)
    Max. Input Voltage 1000V DC
    Input Impedance 10MW
    AC mV/Volts TRUE RMS
    Ranges 80mV, 800mV, 8V, 80V, 750V
    Best Resolution 1µV
    AC Volts Accuracy (80mV, 800mV, 8V ranges) 50/60Hz: ±(0.5% + 10d))
    50Hz - 1KHz: ±(1.0% +10d))
    1KHz - 10KHz: ±(3.0% + 10d))
    10KHz - 20KHz: ±(5.0% + 10d)
    AC Volts Accuracy (80V and 750V Range) 1% from 50Hz to 400Hz
    AC + DC V Accuracy ±(1.0%+ 10d) 50Hz to 200Hz
    Max. Input Voltage 1000 V DC or AC peak
    Input Impedance 10MW (1GW 80mV and 800mV)
    DC Current
    Ranges 80mA, 800mA, 8A, 10A
    Best Resolution 1.0µA
    Accuracy ±(0.5% + 10d)
    Overload Protection 0.8A/250V fuse and 10A/250V fuse
    AC True RMS Current
    Ranges 80mA, 400mA, 8A, 10A
    Best Resolution 1.0µA
    Accuracy ±(0.5% + 10d) 50Hz to 1KHz
    Accuracy AC+DC Amps ±(1.0% + 10d) 50Hz to 200Hz
    Overload Protection 800mA/250 fuse and 10A/250V fuse
    DBM
    Range -80dBm to +80dBm
    Best Resolution -0.01dBm
    Accuracy ±(1.0% or reading)
    Default Ref Impedance 600W (Ref. Impedances from 4W to 1200W maybe selected)
    Resistance
    Ranges 800W, 8KW, 80KW, 800KW, 8MW, 80MW
    Best Resolution 10.0mW
    Accuracy ±(0.3% + 10d)
    Max. Input Voltage 250V
    Diode and Continuity Test
    Range 8.00V
    Accuracy ±(3% + 10d)
    Buzzer Will sound at < 50W
    Frequency
    Ranges 1KHz, 10KHz, 100KHz, 1000KHz, 8MHz
    Best Resolution 0.01Hz
    Input sensitivity 0.7V AC rms
    Accuracy ±(0.05% + 5d)
    Max. Input Voltage 250V
    Max Frequency read with optional adapter 1Ghz
    Secondary Display Reads Duty cycle and mS pulse width
    RPM
    Range 0 to 99,999
    Resolution 1RPM
    Accuracy ±(0.1% + 5d)
    Note: The RPM function is the secondary display of the frequency measurement and requires the RPM adapter
    Capacitance
    Ranges 1nF, 10nF, 100nF, 1µF, 10µF, 100µF.
    Best Resolution 1pF
    Accuracy ±(2.5% + 10d), (±5% + 10d), 1nF range
    Maximum Input Volts 250V
    Temperature
    Ranges -50 to 1372°C (-58 to 2502°F)
    Thermocouple K type
    Display °C primary display °F secondary display
    Resolution 0.1°
    Accuracy ±(2.5% + 8d)
    Square wave Generator
    Amplitude Approx 3V
    Frequencies from 0.500Hz to 5.000KHz may be selected in 15 Steps
    Duty Cycle Variable from 1% to 99%
    General Specifications
    Operating Temperature 0 to 50ºC (32 to 122ºF)
    Power 9Volt battery @ 36 Hours of operation
    Size 7.5" (H) x 3.54" (W) x 1.45" (D)
    Weight 1.43 lbs
    Auto Power-Off 30 minutes or the timer value.
    Accessories Instruction manual, Test leads, Holster, Temperature probe, 9V battery, RS-232 software and cable